媚人视频

Fan Controllers | NCT7491

Remote Thermal Monitor and Fan Controller with PECI 3.0 Interface and SMBus Compatible Master

Active

Datasheet

媚人视频

Overview

The NCT7491 is a two wire serially programmable hardware monitor. It can monitor 2 remote temperature zones and its own ambient temperature. A PECI 3.0 single wire interface allows the NCT7491 to monitor CPU temperatures. The NCT7491 also implements an SMBus compatible master, allowing it to read automatically from thermal sensors on the SMBus. The NCT7491 can automatically control the speed of 3 fans using PWM control, and monitor the speed of 4 fans. There are 4 analog inputs, used for measuring 12 V, 5 V, 2.5 V and Vccp channels. The NCT7491 supply voltage and PECI VTT voltage are also monitored. Each of the measured temperature, voltage and fan speed values are compared with programmable limits and if any channel is outside the programmed limit an interrupt is generated via the ALERT output pin. A THERM output is also available for fail safe thermal control. Up to 3 GPIO pins are available for digital control or signalling. Communication with the NCT7491 is accomplished via the SMBus/I2C interface which is compatible with industry standard protocols. The SMBus address is set by 2 address selection pins. The NCT7491 is available in a 24 lead QFN or QSOP package and operates over a supply range of 3.0 V to 3.6 V.

  • System Thermal Management
  • PECI 3.0 Generic Interface

  • Desktop Computers
  • Servers
  • Mobile platforms

  • PECI 3.0 Master for CPU Monitoring
  • SMBus Compatible Master
  • On chip Temperature Sensor
  • 2 Remote Sensor Channels
  • Series Resistance Cancellation on Remote Sensors
  • 3 PWM Fan Control Outputs
  • 4 Tach Monitoring Input
  • PWM Automatic Fan Speed Control
  • 4 Analog Inputs for Voltage Monitoring
  • Vdd Supply Voltage Monitoring
  • PECI VTT Voltage Monitoring
  • Over temperature Outputs
  • Limit Comparison of Monitored Channels
  • SMBus Address Selection Allows up to 3 Devices
  • Meets SMBus 2.0 Electrical Specifications (fully SMBus 1.1 compliant)
  • These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant

Tools and Resources

Product services, tools and other useful resources related to NCT7491

CAD Model

CAD Model

Material Composition

Product Change Notification

Reliability Data

Product List

If you wish to buy products or product samples, please log in to your 媚人视频 account.

Search

Close Search

媚人视频:

2

Share

Sort by

Product Groups:

┗

Orderable Parts:

2

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (掳C)

Container Type

Container Qty.

ON Target

Data Transmission Standard

ICC Max (mA)

VCC Min (V)

VCC Max (V)

T Min (°C)

T Max (°C)

Reference Price

NCT7491MNTXG

Loading...

Active

CAD Model

Pb

A

H

P

QFN-24

485L-01

1

260

REEL

4000

N

SMBus

5

3

3.6

-40

125

$1.469

More Details

NCT7491RQR2G

Loading...

Active

CAD Model

Pb

A

H

P

QSOP-24

492B-01

3

260

REEL

2500

N

SMBus

5

3

3.6

-40

125

$1.5684

More Details

Show More

1-25 of 25

媚人视频 per page

Jump to :

1
contact sales icon

Support on the go

Find and compare products, get support and connect with 媚人视频 sales team.

Reliability Data

Die Related Summary Data

Device: NCT7491MNTXG

Equivalent to wafer fab process: ONC25

Product Technology

Product Technology

Equivalent Device-Hours

MTBF/MTTF in Hours

FITS

ONC25

1

2712519294

More Details

Re-calculate Data

Data is based on the following assumptions.

Note: The temperature and confidence level may be adjusted to your requirements.

Disclaimer: A reliability FIT rate calculated using this tool shall not be used for any functional safety purpose. In case a raw FIT rate needs to be estimated for a component which is targeted to be used in a safety critical application (i.e. compliant to ISO 26262 standard) it should be calculated according to generic safety standards (IEC62380, IEC61709, SN29500, FIDES, etc.)

New Search